Conquest

From Wiki Grepolis EN
Revision as of 01:40, 23 August 2010 by JKP3nt (talk | contribs)
Jump to navigation

Conquering is the process by which you take over another city. This is considered the best way to get a new city in Grepolis. In all worlds Alpha through Epsilon, the conquer system is used, but for worlds after Zeta and including Zeta, the Revolt system is used. Relevant Guide from forums: Guide-Worlds Alpha to Epsilon only


Conquering

Prerequisites

Before you are actually going to conquer anything, you need the following things:

without these then you can not expect to conquer a city, and it is suggested that you have an excess of the bare necessities.

Choosing a City

Requirements

When choosing a city to conquer, it is best that the city not be any of the following:

  • less then 750 points
  • Owned by another alliance
    • Unless you are at war with them, you do not want to incite any diplomatic incidents
  • Owned by a much larger player
    • If you only conquer one of a player's cities, then they might retaliate using the rest of their cities
  • Too small
    • If the city is too small, then you should probably wait
  • too far away from you
    • If a city is too far away, you will not be able to use the cities to support one another
  • On the same island as one of you other cities
    • You can not farm efficiently with 2+ cities on the same island
  • Claimed by an alliance mate
    • Usually it is possible to 'claim' cities to conquer in your alliance forums, if someone else has already claimed a city, you should not go for it.

Basically, you want a city that will not cause too great of consequences, but is large enough for it to have been worth it to conquer. Remember, there is no way to abandon a city, so once you have a city, you are stuck with it until it is conquered by someone else.

Examples

I will use three examples of a city to conquer and I will point out the best option:

Example cities
  1. City 1:
    • Abandoned city
    • 2500 points
    • one island over from you
  2. City 2:
    • Owned by a 100000 point player
    • You are currently 20000 points
    • The other player's alliance is twice your alliance's size
    • 10000 point city
    • You can not seem to get a spy through
    • Same island as you
  3. City 3:
    • A one-city player
    • No alliance
    • 10000 point city
    • your spy reports say no troops
    • 2 islands over from you
Example city evaluations

Here is my assessment of each of those cities:

  1. City 1:
    • mediocre city, would make a good second city if there are not any better alternatives
  2. City 2:
    • Probably the worst possible combination of attributes in a conquerable city, do not conquer a city like this
  3. City 3:
    • The perfect city to conquer, you should go for this option if it is ever available.

Preparations to conquer

Before you actually conquer a city, there are many things you will have to do. These include making sure that you are allowed to take the city, that the city is cleared, etc.

Clearing a city

Before conquering a city, you will need to clear it, or kill all of the troops occupying the city. In order to do this, you must go about this process:

  1. spy on the city to find out how much resistance you will meet
  2. attack the city with appropriate forces to destroy all of the troops in the city

After this, you just need to make sure that the city stays cleared of troops.

Claiming a city

Usually alliances will have some sort of way to claim cities. To claim a city means that you say that you are going to conquer it, if you do not claim a city then you may end up having your colony ship accidentally destroyed by an alliance member, you may actually get punished by your leaders, etcetera.

Building a Colony Ship

You must build a colony ship to conquer a city, this might take some time because you need to collect up 10000 of each resource and then wait around 12 hours to build it, so make sure you have built it before continuing onwards.

The conquering process

Now we come to the exciting part, the victim is cleared, you have your Colony Ship ready and you want to do the actual conquering. Here is the order of events:

  1. Send an few attacks which are meant to make sure that all the troops of the city are cleared
  2. time a C-Ship to land a few minutes after the clearing attacks, this might mean sending the C-Ship before you even send off the clearing attacks
  3. Time a lot of support waves of defensive troops to arrive right after your C-SHip lands
  4. 24 hours after the C-Ship lands, the city is yours, supposing that you were able to prevent it being taken form you

Timing attacks

You want to keep your attacks as close together and decisive as possible.

During the conquer

There will be a 24 hour period after your C-Ship successfully lands that you will be vulnerable to attack. If an attack on the city manages to kill either all of your land or all of your navy, then your Colony Ship will be destroyed, the conquer broken, and your remaining troops will come home.

After you have conquered

Once you have conquered, there will be a multitude of things to do to settle in

Researches

Sometimes the city you conquered will have researched some things that you consider worthless. In order to fix this however, you must use up a culture point so be very careful about resetting researches.

God

If the conquered city has a temple and it was worshiping a god, then it will keep this god. You should try to use a different god in the new city then you are using elsewhere, you do this in order to make sure you have as many god powers available as possible

Neighbors

Try to get to know your neighbors and your island of your new city, it may be useful in the future

For the defender

As a defender in the conquer process, you have a couple of options. #You only have one city and #You have multiple cities

You have only one city

In this situation, your options are much more limited, and if your city is conquered, then you will have to start over in the world, although you will keep your alliance.

detecting the conquer attack

You will know that a conquer attack is coming by one of a few methods:

  • You note that the attack is taking far longer then most
  • when you click on the attack, there is a picture of a C-Ship, not a regular boat
  • there are multiple waves of support surrounding one attack.

Preparing for the attack

If you are significantly smaller then your attacker, your best chance is to take out the C-Ship only, but not any of the other attacks. You can do this by any of the following methods:

  • Ask a friend to send you support to arrive just before the C-Ship lands, and ask for them to send attacks right after the C-Ship lands
  • send out your defending troops to attack a farming village/175 point city far enough away

that your defensive troops will arrive right before the C-Ship, but do not send defensive troops to any city that might have troops of its own

  • Send out your offensive troops to arrive right after the C-Ship lands, they will assault the C-Ship
  • If you have any Fire Ships, then keep them at your city to destroy the clearing attacks. They will not be able to harm C-Ships or transport boats, so if you send them out with your defensive or offensive troops, then they will end up assisting the conqueror

If the conqueror is your size

If you are sure you can take on all of the conqueror's troops, and the conqueror only has one city, then you can leave your defensive troops in your city and get more BP

You have multiple cities

In this situation, you are not threatened with being completely destroyed, and you have more chance of deflecting the attacks. All of the methods for if you only have one city do apply in this situation, but the following also apply:

  • you can send support from your other cities to the city that might be conquered, and you can also send attacks at your own city to destroy the C-Ship